PoE-24i 802.3af Power Supply / Injector / Surge Suppressor
Power Supply and Power Over Ethernet inserter compatible with Gateworks Boards and any other equipment which is IEEE 802.3af POE compliant.
The POE-24i is an advanced 802.3af compliant power supply / power inserter.
The power supply is autoranging on the input and has a regulated voltage output.
It has overload and short circuit protection in addition to Ethernet surge suppression built-in.
The POE-24i is not a proprietary unit. It will function with any equipment which is compliant with the IEEE 802.3af POE standards.
Power is supplied on ethernet pins 4/5 (V+) and 7/8 (V-).
Using power over Ethernet to power remote devices has several advantages including;
- The power supply can be centrally located where it can be attached to an uninterruptible power supply.
- The user has the ability to easily power on reset the attached equipment from a remote location.
- There is no need to run additional power cabling to the device as power can be supplied over the CAT5 ethernet cable.
Features:
- "Carrier Class" Power Over Ethernet System
- Auto Ranging Power Supply/ Inserter
- Built-in Ethernet Surge protection to prevent equipment damage
- Overload and Short Circuit Protection
- Minimum Cross Talk and Insertion Loss
- Advanced Switching Technology _ Runs cool
- Complies with IEEE 802.3af POE Standard
- FCC and CE Approved
- Installation Schematic on Label
Applications:
- All systems that are compatible with active 802.3af complaint Power over Ethernet, such as:
- Remote routers, access points and bridges
- IP Camera Systems
- Remote networking equipment
- 400MHz to 10GHz systems
- SOHO Equipment
- IP Phone systems
Detail:
- Ethernet Connector: RJ-45
- Ethernet data rate: 10/100 Mbps
- DC Out: V+ pins 4,5, V- pins 7,8
- LAN port: no power
Specifications:
- Input Voltage: 90 - 264VAC @ 47 - 63Hz
- Input Current: 0.3A @ 120VAC
0.2A @ 230VAC
- Inrush Current: <15A peak @ 120VAC
<30A peak @ 230VAC
- Efficiency: 70% Min.
- Output Voltage: 24VDC @ 0.8A
- Output Ripple: 1% Max
- Switching Frequency: 200KHz Typical
- Line Regulation: +/- 0.5%
- Load Regulation: +/- 1%
- Operating Temperature: -10 to +60° C
- Storage Temperature: -20 to +85° C
- Operating Humidity: 5% to 90% non condensing
- Size (L x W x H): 3.25 in x 3 in x 1.5 in (83 x 76 x 38mm)
- Weight: 5.2oz (147gm)
- AC Connector: IEC-320 C6 (Supercom SC-14)
- Data IN Conn.: RJ45 Shielded Socket
- Data/POE OUT Conn.: RJ45 Shielded Socket
Compliance:
- IEEE: 802.3af POE Standard Mode B
- EMI: EN55022 ( CISPR22) class B
Meets CE
- EMS: EN61000-4-2,3,4,5,6,8,11
Warranty and Support Information: