RP-TNC Jack to RP-TNC Jack Bullet Adapter
Sale! Limited to stock on hand.
This Altelicon adapter is used to connect to different types of cable assembles, antennas and access points that require RP-TNC Jack on one side and RP-TNC Jack on the other. For example, this adapter could be used to attach a cable assembly with an RP-TNC Plug end to a RP-TNC plug antenna.
This back to back adapter has RP-TNC threads on the outside with a center pin. (the picture does not show the center pin, but it is there.)
Features:
- Nickel plated body for enhanced corrosion resistance
- Gold plated center contact for reduced signal loss
- Handy device to have on hand to solve your interconnection problems
Electrical Specification:
- Impedance: 50 Ohms
- Frequency Range: DC upto 11 GHz
- Peak Voltage Rating: 500 Volts
- Dielectric Withstanding Voltage: 1000 Volts RMS
- Insertion Loss: .15 dB maximum
Material:
- Size: 1.28" x .437" or 32.5mm x 11.1mm
- Body: Nickel Plated Brass
- Contact: Gold Plated Brass
Mechanical:
- Mating: 7/16-28 UNEF THreaded Coupling (RP-TNC)
- Mating Torque: 15 inch pounds (170 N.cm) Maximum
Environmental:
- Temperature Range: -55C (-67F) to +85C (185F)
- Temperature Cycling: MIL-Std. 202 Method 102 (Test Condition C)
- Weatherproof: Yes
- Moisture Resistance: MIL-Std. 202 Method 106 (Test Condition B)
- Corrosion: MIL-Std. 202 Method 101 (Test Condition C)
- Vibration: MIL-Std. 202 Method 204 (Test Condition B)
- Altitude: MIL-Std. 202 Method 105 (Test Condition C)
Warranty and Support Information: