• case1c1blku-ant
  • Closeup of Laser Etching
  • Closeup of Laser Etching
  • Closeup of Laser Etching Serial Port
  • Laser Etched Alix Rear ports

click on thumbnail to zoom
Item #: case1c1blku-ant
Reg. Price: $14.00
Our Price: $20.00
34 units available


ALIX.2D2 ALIX.6F2 2 LAN Indoor Enclosure Black with USB & ANT

On Sale!

Enclosure for ALIX.2 / ALIX.6 (2 LAN, black, USB, antennas)

This is the black case for the WRAP.1-1 (2 LAN), ALIX.2C2 / ALIX.2D2 board (2 LAN) and ALIX.6E1, ALIX.6E2, ALIX.6F2 boards (2 LAN) with USB and two antenna cutouts.

  • Designed for WRAP.1x, ALIX.2C2, ALIX.2D2 , ALIX.6E1 and ALIX.6E2 and ALIX.6F2
  • 2 ethernet model
  • Anodized aluminium
  • 3 LED lights, reset button
  • Ethernet (2), power and console
  • Dual USB cutout
  • Two SMA connector cutouts (Not installing antennas? Simply turn the lid 180 degrees to cover the holes.)
  • 158x158x28mm
  • RoHS Compliant: yes

Made in the USA by Netgate

Part number: case1c1blku-ant

Package Includes:

  • 4 screws to mount system board
  • 4 screws to close enclosure
  • 4 self-adhesive feet

Assembly notes:

Tools needed: Phillips screw driver, 5 mm or 3/16" nut driver. Remove hex nuts from DB9 connector of ALIX board. Install CF card. Hold ALIX board with the DB9 connector facing up (so the shell doesn't fall off), then slide the enclosure base over it at a slight angle. Tilt ALIX board into place and insert all screws and hex nuts. Tip for replacing self-cutting and plastic screws: To find the start of the existing thread, turn screw counterclockwise first until you feel the start.

Warranty and Support Information:

  • Standard 30 day return policy
  • 30 day manufacturers limited warranty
  • All Specifications subject to change without notice.


Be the first to submit a review on this product!
Review and Rate this Item