Item #: MPCI.1B
Our Price: $9.95
The product is out of stock.

Description 

PCI Adapter: miniPCI in a PCI Slot

Use this PCI Adapter with a miniPCI card to add wireless access to your deskside systems!

Passive adapter from PCI to miniPCI bus, allows installation of miniPCI peripherals in PCI systems.

Features:

 

  • Perfect solution for integrating any miniPCI Card in a standard PCI slot.
  • High quality gold fingers ensures high reliability.
  • The slot bracket has a punchout SMA sized hole for your pigtail and antenna. (Pigtail and antenna are NOT included).
  • miniPCI v1.0 standard compliant
  • PCI v2.1 and v2.2 compliant

Specification:

 

  • miniPCI v1.0 standard compliant
  • PCI v2.1 and v2.2 compliant
  • System Requirements: PC with PCI Slot
  • Operating Systems: Windows ME/2000/XP. Linux / *BSD should work but we do not support these operating systems.
  • Board size: 65 mm x 120 mm

Notes:

  • Recommended for use in systems with a 3.3V PCI bus or with 5V tolerant radio cards.
  • The system board must supply 3.3V to the PCI bus, no on-board regulator.
  • Not recommended for old system boards or for use together with 5V PCI cards.
  • CAUTION: MPCI.1A connects PCI pins A10, A16, B19, A59, B59 to 5V VCC. These pins must be disconnected for systems with 3.3V VIO.

Additional Information:

 

Warranty and Support Information:

 

  • Standard 30 day return policy
  • 30 day manufacturers limited warranty
  • All Specifications subject to change without notice.

Reviews

Average Rating:
(based on 1 review)

Showing 1 Review:

RatingReviewerReview
by Lester J. M.
on 3/9/2007
To be installed in systems with 3.3V PCI signaling only!
I have bought two of these cards and neither one worked with either a 5004/CM9 or a EMP-8602 Plus. either everything was dead out of the box or additional information really needs to be supplied about the use of this item.

Netgate says: This is a widely distributed miniPCI to PCI adapter from PC Engines.  We've sold thousands of these cards with only an occasional problem being reported.  The miniPCI adapter works fine with both the 5004/CM9 and EMP-8602 PLUS cards that we've tested.  

# Notes: This adapter should be installed in systems with 3.3V PCI signaling only. The 3.3V supply is taken from the system board. Not recommended for old system boards or for use together with 5V PCI cards.

# CAUTION: MPCI.1A connects PCI pins A10, A16, B19, A59, B59 to 5V VCC. These pins must be disconnected for systems with 3.3V VIO. 

Please feel free to contact us for pre-sales advice next time before you purchase a product that may be incompatible with your system.
Review and Rate this Item